Product IntroductionDetector Modules

Detector Modules
- Design/manufacturing on request -

We can provide a detector also as a detector module including electronics (amplification, A/D conversion) processing signals from detectors.
We will design and manufacture products according to your purpose and requirements. Please consult with us about what you need.

Features of our detector module

An ADC (A/D converter) for each channel is set directly beneath a detector to transmit digital signals.

This circuit structure allows short transmission distance of analog signals, providing advantages such as less data deterioration caused by outside noise and resulting in less restrictions on the total number of channels and ADC speed required by the system configuration.

We can design, manufacture, and supply scintillator crystals, detectors, and modules to provide a total solution. We can propose a product perfect for your system.

For high energy

We have made possible lower noise than a conventional multiplexer system by simultaneous AD conversion in parallel.
Use of discrete parts allows design flexibility and response to large input signals.

Sensor Board (SB)

SNR (electronic)
Full Scale Range [pC] SNR
39 97000:1
54 105000:1
120 120000:1
SNR (with detector)
Full Scale Range [pC] SNR
39 33000:1
54 41000:1
120 87000:1
Gain
Fixed
AD Conversion [bit]
18
Conversion Time [µs]
410
Channel Number [ch]
32
ADC Number [ch]
32
Power Supply [V]
+24
+5
-5

Control Board (CB)

Supported Channel Number [ch] (@500Hz)
2400
Data Rate (SB ~ CB) [Mbps]
25
Communication Topology (SB ~ SB / SB ~ CB)
Daisy chain
External Input [bit] (Timing Signal)
4
Host Communication
Ethernet
Power Supply [V]
+24

For medium/low energy

Just like a product for high energy, we can attain less noise than a conventional multiplexer system with our simultaneous AD conversion process in parallel.
Use of ASIC allows programmed gain changes.

Sensor Board (SB)

SNR (Electronic)
Full Scale Range [pC] SNR
1.75 16000:1
10.0 28000:1
87.5 54000:1
SNR (with Detector)
Full Scale Range [pC] SNR
1.75 12000:1
10.0 25000:1
87.5 43000:1
Gain
Programmable
AD Conversion [bit]
18
Conversion Time [µs]
430
Channel Number [ch]
128
ADC Number [ch]
128
Power Supply [V]
from CB

Control Board (CB)

Supported Channel Number [ch] (@500Hz)
2048
Data Rate (SB ~ CB) [Mbps]
40
Communication Topology (SB ~ SB / SB ~ CB)
Bus Chain
External Input [bit] (Timing Signal)
3
Host Communication
Ethernet
Power Supply [V]
+24
Scintillators Detectors